JMB-M-WK+
The JMB-M-WK+ is an environmentally friendly moss and weed killer on a trailer, which can also serve as a high pressure cleaner. By using the hot water technique, weeds and moss are effectively controlled without the use of pesticides. Thanks to our ingenious TC system in low pressure function (= WK-function), the machine delivers a constant water temperature of 99° C up to the surface.
The JMB-M-WK+ is constructed in such a way that two people can work with it simultaneously. The protective cover must remain closed during work. This benefits the life of the machine and ensures that there is very little noise production (less than 85 dB).
New and progressive is the operating panel with digital display and joystick.
Features
Specifications
Product
Modern & aerodynamic design for less air resistance
New operating panel with digital display and joystick:
- Everything visible at a glance. Easy to adjust with a handy joystick and to operate with gloves.
- Electronic setting of the temperature (exact & constant)
- Electronic control with pressure gauge, hour counter, maintenance information, error messages and device functions that facilitate maintenance.
- The digital display indicates continuously the status of the machine and alarm.
Extensive storage options: four lance holders under the guard and two extra lance holders on the outside
Galvanized trailer fitted with support and swivel wheel with rotation casted polyethylene housing (light-weight)
Reinforced swivel wheel with rubber tire
2 stainless steel DiBO hose reel with 25 m high pressure hose (3/8") equipped with heat protection
Technical
Industrial water-cooled 3-cylinder diesel motor (18.9 kW) with extra pre-heating of the supply water through a heat-exchanger so 15% less fuel is consumed
TC-system: In WK-function there is a constant water temperature of 99 °C at the special lance for weed killing (WK)
High-tech heating system:
- 110 kW GreenBoiler for a greater efficiency > 92%
- 18% fuel saving
- Low CO2 emission
- Low maintenance cost
110 kW GreenBoiler + 20 kW heat exchanger = 130 kW heating power
Radial high pressure pump with 3 ceramic plungers and stainless steel valves
12 V operating voltage for the electronic control unit and burner boiler
Automatically adjusts the speed depending on high pressure/Weed killing-function (WK)
Automatic speed regulation, idling after 30s
Built-in 450 l water tank
Stepless pressure and flow regulation via speed engine governor >>> electronically
Pressure reduction up to 10 bar with sealed gun
Anti-limescale system with level detection
Automatic pre-glowing
Prepared for a specially cushioned axle (in line with German law)
Variations
| SKU | Description | bar | l/h | ° C | kW | kW | l | l | mm | kg | Nozzle | Motor | Use |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.130.545 | JMB-M-WK+ 250/25 TG | 250 | 1500 | 99 (on surface) (WK-function) / max. 110 (HP) | 11,9 | 110 | 80 | 450 | 3500 x 1750 x160 | 1050 | 065 | Diesel | Professional – INTENSIVE |
