DiBO S7
Advanced technology for a lasting success and reliability
Product specifications
Structure
- Galvanized and painted steel frame
- ABS claddings *
- Direct gantry drive with inverter
- High resistance aviation type rivets
- Stainless steel bolts
Vertical brushes
- Galvanized steel single beam guide rail
- Electric motion
- Double brushing on front and rear of the car
- Double tilt and locking by means of cylinder
- Electronic power control
Horizontal brush
- Electrical lifting with inverter
- Electronic power control
- Stainless steel guide rails
Drying
- Horizontal contouring blade in galvanized and painted steel, with side flows for drying windows and sides
- Electrical lifting with inverter
- Stainless steel guide rails
- Side drying with 2 electric blowers *
- Fall arrest safety system
* Optional
Standard equipment
- Hydraulic system with solenoid valves and special manifolds
- Shampoo dosing pump
- Wax dosing pump
- Single wall festoon cable loop supply
- Control with display and wall button board
- Self-Service arrangement fully integrated in the machine's electronics
Standard features
Drying
Contour following stainless steel horizontal blade tilting in 3 positions.
Two horizontal electric blowers 3 kW/each.
Two lateral electric blowers 4 kW/each.
Security
Lifting belt loosening alarm.
Blade anti-fall locking system on drying.
Wax application
The wax is applied by top nozzles and laterally delivered by nozzles positioned close to the vehicle sides for a perfect water-repellent effect.
A wide range of accessories, a few examples:
High pressure system pre-wash:
Wheels
Tilting wheel washer with fully integrated rotating high pressure, for a thorough cleaning of rim, wheel arches and sills.
Fixed lateral
Fixed lateral jets for a powerful pre-wash.
High pressure contour following
Contour following stainless steel blade with 3 position tilt delivering maximum water impact for a most complete pre-wash.
Stainless steel wheel washer:
Wheels
The reversal of rotation and inclination of the brush allows a thorough cleaning of the rims of every dimension.
Positioneringslichten
Door het omkeren van de roterende beweging in combinatie met de hoekinstelling zorgt de wielwasser voor een perfecte reiniging van velgen met elke diameter.
- Positioneringslichten vervaardigd uit multicolor LED-panelen.
- Mogelijkheid keuze 1 of 2 modules
High pressure pump system:
Choices of 42, 84 or 126 liters high pressure pumps system, for a powerful pre-wash. Available in insulated outdoor cabinet or in frame for technical room.
Sensitive side brushes:
Tilting side brushes, electronically controlled, perfectly adapting to the profile of the car.
Synchro System:
Drier beam lowers into position as horizontal brush lifts to park, top high pressure arch lifts to park as horizontal brush lowers into position, saving further seconds of programme times.