The CT 80 is the smallest ride-on scrubber dryer in our range, but is still designed on a robust industrial platform. There are 2 different types, one for highly professional two-brush applications (CT80-BT55 ECO) and another for less intensive single brush uses (CT80-BT70). Though extremely compact (length only 130 cm), the CT 80 nevertheless carries an 83 litre solution tank that gives better than average autonomy for this class of machine. The CT 80 also features the exclusive EcoSelect function. This uses a single program to control the delivery of water and cleaning product according to the speed of the machine, as well as the speed of the brush and suction motors, reducing both energy consumption and noise.
Note: Not all features are available for all product types.
Extremely compact (length only 130 cm) with an 83 litre solution tank and with a 185 cm minimal turning radius.
Solution supply possibility:
- in ECO mode for constant savings;
- in automatic mode according to machine speed. Brushes and suction motors adjustment:
- further decrease of energy consumption;
- more noise reduction.
Operator display with intuitive symbols and selectable languages.
CFS-system: Solution distribution from brush center avoids solution wastes.
SLS-system: Self-levelling mechanical system for an always perfect adherence between brush and floor.
EDD-system : VSqueegee designed for the highest drying and productivity results.
Auto/stop-system: Deactivation and re-start of working function simply with a command on pedal. It includes brush and suction delayed stop for irregular working stages.
Detergent dosing system separated from water supply. It allows consistent savings on chemical products. Tank easily removable.
Anti-foam system with special electromechanical suction motor protection. Automatic suction stop when the tank is full.
Complete with a memory card that can be removed and read by service personnel
Yellow operator maintenance areas.
Automatic brush click-on/off
Brush, blades and suction hoses replacement without tools.
Nylon standard brushes with maximum consumption indicator
Positioned in height discharge hose (ø 50 mm)
Tank can be easily tilted to check the internal areas of the machine.
Motor gear box, suction motor and electric components of high quality.
Electronic solution flow adjustment
On board battery charger
Brush rotation: independent oil bath motor gear box
Brush pressure: on-off actuato
Suction: 2 stages with stainless steel fans and shaft
Traction: parallel axis differential with stainless steel bearings
Plastic parts with long life
Tanks: great thickness high density polyethylene
Squeegee blades: made in Latex usable on 4 sides
Hoses: suction and discharge made in high resistance polyurethane
Wheels: oil resistant
Chassis: double treatment with galvanizing + die-casting
Bearings: shielded against humidity and water seepages
Bolts and nuts: made in stainless steel where there are water contacts
Carbon brushes: easily changeable
Boards: equipped with protective film against water and humidity
Solenoid valve: with Viton membrane resistant against chemical agents
Sensors: solution and recovery water level protected against accidental impacts
Memory card: for machine data log: Memory card It allows to memorize: Batteries charge cycles Motors absorptions
Display: of great dimensions, multi-language, complete with hour counter, battery level and working programs
|24 V (4x 6 V) battery
|24 V (4x6 V)
|180 Ah (C5)
|1310 x 673 x 1030
|2,5 - 5 h