CT230

The DiBO CT230 is an extremely robust and utterly manoeuvrable scrubber-drier with great performance. Thanks to the well-thought-out design with optimal use of the height, this scrubber is ideal for long-lasting works. Therefore it is very suitable for the cleaning of big surfaces. Thanks to its ingenious “tank-in-tank” system – which allows a big battery compartment despite a water tank of 205l and a recovery tank of 225l – this is the most suitable ride-on scrubber for a variety of cleaning purposes. Consider the cleaning of school floors, department store floors, gym floors, factory floors, ... The SWEEPER CT230 is also available in a version equipped with cylindrical brushes combined with a PRE-SWEEP system. Thanks to this pre-sweeping system, this model has a full sweep function next to the scrub function for inside and/or outside use. Both models are supplied without batteries (6x 6V DC) and battery charger.

Note: Not all features are available for all product types.

Specifications

Product

The soundproofing system guarantees low noise levels (<68 dB(A)).

Control panel Brushes, solution and vacuum inserted by one unique command or singularly upon necessity.

CFS-system: Solution distribution from brush center avoids solution wastes.

SLS-system: Self-levelling mechanical system for an always perfect adherence between brush and floor.

EDD-system : VSqueegee designed for the highest drying and productivity results.

Deactivation and re-start of working function simply with a command on pedal. It includes brush and suction delayed stop for irregular working stages.

Detergent dosing system separated from water supply. It allows consistent savings on chemical products. Tank easily removable.

Anti-foam system with special electromechanical suction motor protection. Automatic suction stop when the tank is full.

Electronic solution flow adjustment

Automatic brush attachment and release system (without hands or tools).

Yellow operator maintenance areas.

Nylon standard brushes with maximum consumption indicator

Brush, blades and suction hoses replacement without tools.

Positioned in height discharge hose (ø 50 mm)

“Water stop” system for solution tank filling

Tank can be easily tilted to check the internal areas of the machine.

Motor gear box, suction motor and electric components of high quality.

The BTRS-version is equipped with cilindrical brushes and in addition to the surfaces cleaning, they allow the collection of debris.

Technical

Motors

Brush rotation (BT-version): independent oil bath motor gear box

Brush rotation (BTRS-version) special motor with toothed belt transmission

Brush pressure: actuator with pressure adjustment system

Suction: brushless with stainless steel fans and shaft

Squeegee: automatic lift during reverse

Traction: motor wheel with parallel axis, 16% climbing rate

Plastic parts with long life

Tanks: great thickness high density polyethylene

Squeegee blades: made in Latex usable on 4 sides

Hoses: suction and discharge made in high resistance polyurethane

Wheels: oil resistant

Mechanic

Chassis: double treatment with galvanizing + die-casting

Bearings: shielded against humidity and water seepages

Bolts and nuts: made in stainless steel where there are water contacts

Electric system

Carbon brushes: easily changeable

Boards: equipped with protective film against water and humidity

Solenoid valve: with Viton membrane resistant against chemical agents

Sensors: solution and recovery water level protected against accidental impacts

Display: digital with hour counter and battery level

Variations

SKU Description mm mm Drive l l V A mm kg h Areas Power supply m²/h
3.126.180 CT230-BT105 1050 1280 36 V (6x 6 V) battery 205 225 36 V (6x6 V) 320 Ah (C5) 1950 x 1155 x 1466 378 3 - 5,5 h 5000-12000 Battery traction 6825
3.126.183 CT230-BT100R Sweep 1000 1280 36 V (6x 6 V) battery 205 225 36 V (6x6 V) 320 Ah (C5) 1950 x 1170 x 1466 382 3 - 5,5 h 5000-12000 Battery traction 7500

Accessories

Standard

Contra-turning nylon brush - CT230 (2 pieces)
3.8006.SPPV01546
Cilindrical nylon brush PPL - standard (2 pieces) >>> CT230-BT100R Sweep
3.8006.SPPV01330
2x "Medium" PPL nylon side brush (CT230-BT100R Sweep / 1250 E 2B / 1280 E/D 2B) (Packed per piece)
3.8006.SPPV00018
Squeegee withe fast blade change (V-shape) Blades can be used in all 4 directions - CT230
3.8006.KTRI01976
Front squeegee blade (Latex) - CT230
3.8006.MPVR05885
Rear squeegee blade (Latex) - CT230
3.8006.MPVR05886

Optional

Pad holder - CT230 (2 pieces)
3.8006.SPPV01154
Standard pad WHITE - BT105 -21” (533 mm) - 4 pieces
3.8006.SPPV01415
Standard pad RED - BT105 -21” (533 mm) - 4 pieces
3.8006.SPPV01433
Standard pad GREEN - BT105 -21” (533 mm) - 4 pieces
3.8006.SPPV01451
Standard pad BLACK - BT105 -21” (533 mm) - 4 pieces
3.8006.SPPV01469
Standard pad BLUE - BT105 -21” (533 mm) - 4 pieces
3.8006.SPPV01442
Battery 36 V (6 x 6 V) – 320 Ah (C5) – (2x for CT160, CT230)
3.217.011
Battery charger
3.217.004

Downloads

Product information - CT230

20240304

Manual CT160 / CT230

Manual CT160 / CT230

Pictures from manual CT160 / CT230

Pictures from manual CT160 / CT230